Home  /  Services  /  Fixtures
Fixtures

The pieces that make the room, made to order.

Large windows, custom doors, furniture, lighting and steel staircases — designed with your room and sourced direct from the makers. No showroom mark-up, no reseller chain.

Design. Build. Delivery.
Floor-to-ceiling glass, linear pendant, custom dining table
Windows & doors
Aluminium, iron, wood and glass
Stairs
Steel, finished in wood, glass or stone
Made to
Dimensioned production drawings
What's covered

5 categories, one team.

Each one is chosen with the design of the room, not bought separately afterwards.

01 / 05

Windows

Large-scale windows and sliding glass doors, made to your openings.

  • Large-format and sliding glass doors
  • Aluminium frames in custom sizes
  • Factory QC measured against drawings
Floor-to-ceiling glass wall
Floor-to-ceiling glass wall
Steel-frame windows
Steel-frame windows
02 / 05

Doors

Custom doors in wood, iron, aluminium and glass. One design can often be made in more than one material.

  • Entry, interior and pivot doors
  • Iron doors with glass panels
  • Louver screens and room dividers
Iron door with operable glass panel
Iron door with operable glass panel
Aluminium louver screen
Aluminium louver screen
03 / 05

Furniture

Custom pieces made to the room, alongside sourced furniture.

  • Custom sofas, tables and dining cabinets
  • Wood-and-resin feature pieces
  • Rugs and textiles
Mid-century lounge
Mid-century lounge
Oak dining table and chairs
Oak dining table and chairs
04 / 05

Lighting

Lighting design is part of every room. The electrical work is done by licensed trades.

  • Chandeliers and pendants
  • Linear and LED lighting
  • Sconces and lamps
Brass chandelier, marble wall
Brass chandelier, marble wall
Globe pendant
Globe pendant
05 / 05

Stairs

Modern steel staircases finished in wood, glass or stone, with glass-and-steel railings.

  • Steel stringers, wood/glass/stone treads
  • Glass and steel railings
  • Made to measured production drawings
Steel staircase mid-assembly at the factory
Steel staircase mid-assembly at the factory
Glass-and-steel railing, installed
Glass-and-steel railing, installed
What's included

How fixtures are sourced.

Designed, sourced, installed — completely managed by one team.

Quote

Scope and materials agreed with the maker.

Production drawings

Dimensioned drawings, approved before anything is made.

Quality check

Measured against the drawings at the factory.

Ship & install

Crated, tracked, and installed by the licensed trades we manage.

Cost

Published, so you can plan.

Once you approve your price, it doesn't change.

$250–$600per sq ft

Full project cost, depending on materials and how much is custom-made. Your price is set from your measurements and selections.

Site-visit package — measure, 2D plan, 3D views, materials, estimate
$500
Site-visit package, credited if you go ahead
$500

How payments are split

At approval50%
Products ship20%
Installation20%
Walkthrough10%

The final 10% is paid only after you have walked through the finished room and approved it.

The IVORAH process

From imagination to handover.

Every project follows the six letters of our name, with one IVORAH project manager coordinating every designer, maker and trade while you talk to one person. See the full process →

  1. I.

    Imagine

    A conversation about your home, how you live, and what you've tried before. We're consultants, not order-takers — we're listening for the problem behind the project: why the kitchen jams when you host, why the family room never gets used. No obligation, no pressure. If we're not the right fit, we'll say so.

    Free · 1 hour
  2. V.

    Visualize

    We walk your home, measure, and photograph. Then you see the design before it exists: a 2D floor plan and 3D views of your actual rooms.

    $500 · first design within 5 business days
  3. O.

    Organize

    Materials and colors finalized with you — direct-sourced stone, tile, and custom cabinetry — then one fully scoped estimate. When you approve it, that price is the promise.

    Fixed quote · 50% confirms
  4. R.

    Refine

    Our install crew re-measures to the millimeter; suppliers produce production drawings; we re-measure on site. Change anything until you approve them — then the design locks.

    Production drawings · design lock
  5. A.

    Assemble

    Materials go into production with our makers and ship. Licensed, vetted contractors build under your project manager, permits and inspections handled.

    Up to 90 days make & ship · 30–45 days install
  6. H.

    Handover

    Punch list complete, rooms styled, and a final walkthrough room by room. The last payment is due only after you've approved the finished work.

    Final 10% · after your approval
Questions

Fixtures FAQs.

Can you make a door in iron instead of wood?

Often, yes. Many of our door designs can be made in wood, iron, aluminium or glass depending on what you need.

How long do custom windows take?

Up to 90 days to make and ship once drawings are approved. Installation follows, usually 30–45 days.

Do you install the lighting?

Lighting is designed and sourced by IVORAH and installed by licensed electricians inside your project.

Can you build a staircase into an existing home?

Yes. The stair is measured on site, drawn to the millimetre, made to those drawings and re-measured before installation.

Before you ask

The questions everyone asks.

What does a project like this actually cost?

Most interior work runs $250–$600 per square foot, depending on the materials and how much is made to order. A typical 200 sq ft kitchen lands somewhere between $50,000 and $120,000. We publish the range because it is the honest answer, and because you should be able to find out before you spend an hour on a call.

What is the $500 site visit, and do I lose it?

We measure and photograph your home, then give you a 2D floor plan, 3D views, material selections and an estimate. If you go ahead with the project, the $500 is credited to it. If you decide not to, the work is yours to keep and the fee is not refunded.

Will the price change once work starts?

No. Once you approve the price, it is fixed. Midway through a project in Germantown, import tariffs on the client's order jumped to 55%. We had promised the price would not change, so we absorbed the tariff and paid three times the normal freight for an 18-day expedited shipment. That job earned us no profit and delivered on time. It is the clearest answer we can give to this question.

How does payment work?

50% confirms the order once you have approved the design and the price. 20% when your products ship. 20% during installation. The final 10% after you have walked the finished project and approved it.

How long does it take?

Your first design is ready within 5 business days of the site visit. Once production drawings are approved, everything is made and shipped to your home within 90 days, and installation takes a further 30–45 days. The 90 days is delivery to your door, not a finished room — we say it that way because the distinction matters when you are planning around it.

Who is actually working in my house?

Licensed contractors we have vetted, coordinated by one IVORAH project manager. Vetting means checking the licence, visiting job sites they have finished, and talking to those homeowners. IVORAH designs, sources and manages the project; the licensed trades carry out the installation under their own licence.

Who pulls the permits?

Permits are coordinated through the appropriately licensed permit holder on your job. Interior work only needs one when plumbing, electrical or gas changes — which most kitchens and bathrooms involve.

What happens if something goes wrong mid-project?

You call one person, your project manager, and they already know your project. Conditions nobody could see until a wall came open are handled through a documented change process: we tell you what we found, what it changes and what it costs, before anyone proceeds.

What if I don't like the design?

Change it. Design changes are unlimited until the production drawings are approved. After that they are locked, because that is the point at which the makers start cutting.

Can I live in the house while the work happens?

For a single room, usually yes. Whole-home projects are phased specifically so that you can, and the sequence is agreed before anything is ordered.

What is the warranty?

It depends on the project and the materials you choose; most carry a one-year warranty. The specifics are written into your quote rather than promised in general terms on a web page.

What don't you do?

We don't do roofing, or anything on the outside of the house. Electrical, plumbing and HVAC are never sold on their own — they happen inside a project, carried out by the licensed trade under their licence. And we don't manufacture: we buy from the workshops that do, to our own production drawings.

Related

Where we work: Greater Memphis, including Collierville, Germantown and Memphis.

Start with a free, one-hour discovery call.

Tell us what you want to change. We'll talk through priorities, budget and whether IVORAH is the right fit.